A-A-2745A
3.10 Identification Marking. The sprinkler shall be marked in a permanent manner with the manufacturer’s name or trade mark of such known character that the source of manufacture may be readily determined. The use of an adhesive-backed label shall be acceptable.
3.11 Workmanship. The sprinklers shall be free from sharp edges, projections, and defects which might impair its performance or appearance. Surfaces shall be free from flaws, and cracked or peeling plating or paint. Water inlets and caps shall not leak. No defect that affects appearance or serviceability shall be permitted.
3.12 Measurement system. The values stated in inch-pound units are to be regarded as the standard. The values stated in parentheses are for informational purposes only.
3.13 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within tolerances specified using conversion tables contained in the latest revision of FED-STD-376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the specification preparing activity for changes to this document.
4. REGULATORY REQUIREMENTS
4.1 Recovered materials. The offerer/contractor is encouraged to use recovered materials in accordance with Public Law 94-580, as amended, to the maximum extent practicable.
5. QUALITY ASSURANCE PROVISIONS
5.1 Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
6. PACKAGING
6.1 Preservation, packing, and marking. The preservation, packing, and marking shall be as specified in the contract or order.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business